Type HD-C ‘Yellow Band’ aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 103 and 106 Ohm.
Type VHD-C Special type ‘VHD’ with three textile braids and thicker wall for lower bending radii and good suction rates. Burst pressure >100 bar/1500 psi.
Type PHD-F Special type ‘PHD’ with non metallic plastic helix and thick wall for enhanced lateral stability. Burst pressure >80 bar / 1200 psi.
Type TW-E Suction-/discharge hardwall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
SPECIFICATION
Meets Standard EN ISO 1825 ( EN 1361), EI 1529 C, NFPA 407 and AS 2683. Approved acc. to German military standard VG 95 955. Specified by almost all major oil companies. Further technical data and types see overleaf
MARKING
Yellow bands every 4 mtr. and continuous embossing as example above.
TYPE HD-C
LINING
Nitrile rubber (NBR), antistatic, no fuel solubility
REINFORCEMENT
Textile braids without metallic strands
COVER
Chloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
APPLICATION
Hydrant inlet and into-plane hose. Up to size 2½" as deck hose. The hose does not kink with a permanent pressure of least 0,5 bar.
TYPE VHD-C
APPLICATION
Fortified hose suitable for reel-, into-plane and hydrant inlet operations, as well as riser systems. In non pressure situations this type is more stable against kinking and flattening.
TYPE PHD-F
APPLICATION
For alternative fuelling and defuelling operation. Up to size 2½" the diameter remains stable even with low bending radii.
TYPE TW-E
APPLICATION
For tank trucks and the connection between truck and trailer as well as riser systems ( see overleaf). Not approved for hydrant inlet and into-plane fuelling
| PART NUMBER (TYPE) | WEIGHT APPROX. (KG/M) | HOSE SIZE ID (IN.) | HOSE SIZE ID (MM) | HOSE SIZE OD (MM) | WORK PRESSURE (BAR) | TEST PRESSURE (BAR) | MAX. VACUUM (BAR) | MIN. REEL DIA. (MM) | COIL LENGTH (M) |
|---|---|---|---|---|---|---|---|---|---|
| HD 10 C | 0,3 | ⅜” | 10 | 19 | 20 | 40 | 0,6 | 140 | 40 |
| HD 19 C (HD 19 C NEON) | 0,6 | ¾” | 19 | 31 | 20 | 40 | 0,6 | 200 | 40 |
| HD 25 C (HD 25 C NEON) | 0,8 | 1” | 25 | 37 | 20 | 40 | 0,5 | 200 | 30+40+50+60+80 |
| HD 32 C (HD 32 C NEON) | 1,0 | 1¼” | 32 | 44 | 20 | 40 | 0,4 | 225 | 30+40+50+60+80 |
| HD 38 C (HD 38 C NEON) | 1,2 | 1½" | 38 | 51 | 20 | 40 | 0,3 | 270 | 30+40+50+60+80 |
| HD 50 C (HD 50 C NEON) | 1,9 | 2” | 50 | 66 | 20 | 40 | 0,3 | 400 | 30+40+50+60+80 |
| HD 63 C (HD 63 C NEON) | 2,4 | 2½” | 63 | 79 | 20 | 40 | 0,2 | 600 | 30+40 |
| HD 75 C (HD 75 C NEON) | 2,8 | 3” | 75 | 91 | 20 | 40 | - | 600 | 40 |
| HD 100 C (HD 100 C NEON) | 3,7 | 4” | 100 | 116 | 20 | 40 | - | 900 | 40 |
| VHD 38 C (VHD 38 C NEON) | 1,4 | 1½” | 38 | 52 | 20 | 40 | 0,6 | 400 | 40 |
| VHD 50 C (VHD 50 C NEON) | 2,0 | 2” | 50 | 67 | 20 | 40 | 0,5 | 500 | 30+40 |
| VHD 63 C (VHD 63 C NEON) | 2,8 | 2½” | 63 | 81 | 20 | 40 | 0,4 | 550 | 30+40 |
| VHD 75 C (VHD 75 C NEON) | 3,4 | 3” | 75 | 93 | 20 | 40 | 0,2 | 600 | 40 |
| VHD 100 C (VHD 100 C NEON) | 4,4 | 4” | 100 | 118 | 20 | 40 | - | - | 40 |
| VHD 38 C (VHD 38 C NEON) | 1,4 | 1½” | 38 | 52 | 20 | 40 | 0,6 | 400 | 40 |
| VHD 50 C (VHD 50 C NEON) | 2,0 | 2” | 50 | 67 | 20 | 40 | 0,5 | 500 | 30+40 |
| VHD 63 C (VHD 63 C NEON) | 2,8 | 2½” | 63 | 81 | 20 | 40 | 0,4 | 550 | 30+40 |
| VHD 75 C (VHD 75 C NEON) | 3,4 | 3” | 63 | 93 | 20 | 40 | 0,2 | 600 | 40 |
| VHD 100 C (VHD 100 C NEON) | 4,4 | 4” | 100 | 118 | 20 | 40 | - | - | 40 |
| PHD 38 F (PHD 38 F NEON) | 1,5 | 1½” | 38 | 54 | 20 | 40 | 0,8 | 400 | 25+40 |
| PHD 50 F (PHD 50 F NEON) | 2,1 | 2” | 50 | 67 | 20 | 40 | 0,8 | 500 | 25+40 |
| PHD 63 F (PHD 63 F NEON) | 2,9 | 2½” | 63 | 81 | 20 | 40 | 0,7 | 550 | 25+40 |
| PHD 75 F (PHD 75 F NEON) | 3,6 | 3” | 75 | 93 | 20 | 40 | 0,6 | 600 | 40 |
| TW 25 E | 0,8 | 1” | 25 | 37 | 20 | 40 | 0,8 | 200 | 40 |
| TW 32 E | 1,0 | 1¼” | 32 | 44 | 20 | 40 | 0,8 | 225 | 40 |
| TW 38 E | 1,4 | 1½” | 38 | 51 | 20 | 40 | 0,8 | 400 | 40 |
| TW 50 E | 2,1 | 2” | 50 | 66 | 20 | 40 | 0,8 | 500 | 40 |
| TW 63 E | 2,8 | 2½” | 63 | 79 | 20 | 40 | 0,8 | 550 | 40 |
| TW 75 E | 3,3 | 3” | 75 | 91 | 20 | 40 | 0,8 | 600 | 40 |
| TW 100 E | 4,7 | 4” | 100 | 116 | 20 | 40 | 0,8 | 900 | 40 |